sorenharbo
Registered: 19/04/09
Posts: 37
|
| Posted 04/03/10 at 08:27 PM | Reply with quote #1 |
|
Hi '
I use µOLED-32028-P1T(SGC)with a modified version of SPE_alpha01.4dg.
I have a problem with the TOUCH command 'o'
Everything work ok, until a certain limit of drawings, buttons etc. is loaded to the display.
An example: I load am alphanumeric keyboard, 26 buttons and some text. Then the Touch command returns 'N' in about 8 secs and then the TOUCH command works again.
What can cause this delay in responce on the TOUCH command, when there have been a lot of activity on the serial port ?
- Soren |
| Loading... | |
ESPsupport
Moderator
Registered: 27/01/09
Posts: 4,254
|
| Posted 08/03/10 at 03:53 PM | Reply with quote #2 |
|
We recommend you use the SGC platform and not the SPE.
The problems you describe are typical of what happens if you do not wait for the ACK after each command.
|
| Loading... | |
sorenharbo
Registered: 19/04/09
Posts: 37
|
| Posted 08/03/10 at 05:11 PM | Reply with quote #3 |
|
I do wait for acknowledge after each command !
Where do I find the SGC platform for download ?
- Soren |
| Loading... | |
ESPsupport
Moderator
Registered: 27/01/09
Posts: 4,254
|
| Posted 08/03/10 at 08:06 PM | Reply with quote #4 |
|
From here http://www.4dsystems.com.au/prod.php?id=91
Then click on the downloads tab
|
| Loading... | |
